The Experimental and Theoretical Probability Series

Last week, we have completed the 5-part Experimental and Theoretical Probability Series. To those who have not read it, below is the list of posts.

  1. Experimental and Theoretical Probability Part 1. This post discusses about the sum of the number of dots of two rolled standard cubical dice.  A spreadsheet is used to simulate the rolling 1000 times and sums are recorded and tallied. A step-by-step instruction in doing the simulation is provided.
  2. Experimental and Theoretical Probability Part 2. This post confirms the findings in Part 1. Two more experiments are conducted — the first one is rolling the dice 2000 times, and the other is rolling it again 3000 times.
  3. Experimental and Theoretical Probability Part 3. The third part is a discussion on why the findings in Part 1 and Part 2 are such.  The ways of getting a particular sum is discussed in this post.
  4. Experimental and Theoretical Probability Part 4. The fourth part discusses the relationships between the experiments and the findings in Part 3. The formal definitions of Experimental and Theoretical probabilities are also discussed here.
  5. Experimental and Theoretical Probability Part 5. The fifth part summarizes the series and give real-life examples that use experimental and theoretical probability.

I hope you have enjoyed reading this series. Watch out for more Math and Multimedia Tutorial Series.

Experimental and Theoretical Probability 5

This is the fifth and the final part of the Experimental and Theoretical Probability Series.  In this post, we are going to summarize what we have discussed in the previous four posts, and we are going to talk about some  real-life applications of experimental and theoretical probability.

Standard Cubical Dice

Experimental Probability, as we have discussed in the fourth part of this series, may be obtained by conducting experiments and recording the results. It is the ratio of the number of times an  event occurs to the total number of trials. In the first part of this series, we experimented rolling to dice 1000 times (via a spreadsheet) and we tallied the sums.  We recorded the that sum 2 occurred 29 times out of 1000 trials. We can say that the experimental probability of getting a 2 from that particular experiment is 29/1000. » Read more

Experimental and Theoretical Probability Part 4

This is the fourth part of the Experimental and Theoretical Probability Series. Click the following to view the other parts of this series: Part I, Part II, Part III.

***

In the previous posts in this series, we have experimented with dice by rolling two of them and tallying the results.  We have observed some patterns; the sum frequencies are not the same, and we have discovered that it has something to do with the number of ways a sum could be obtained.

On the one hand, we did the three experiments because we wanted which sum would occur most (or least) often. We wanted to get the experimental probability of each sum.

The experimental probability of an event  is the ratio of the number of times the event occurs to the total number of trials. In the second column of the table, we rolled a four (that is, getting a sum of four) 76 times out of  1000 trials; therefore, the experimental probability of rolling a four in that particular experiment was 76/1000 or 7.6%. » Read more

1 2